The Intech Insider is designed to help readers stay in touch with the latest information & developments in the industrial coating industry. Stay connected with the Intech Insider!

Monday, November 8, 2010

New Product Announcement

Introducing 857N-018 Blue

The DuPont Company and Intech Services, Inc. are pleased to announce a new addition to our family of Teflon* Industrial Coatings. After extensive research development and testing 857N-018, a water-based blue PTFE one-coat, is now in stock and available at Intech Services. 
As environmental concerns in North America continue to tighten on our community of coaters, Dupont introduces a water based one coat for corrosion resistance and anti galling. With VOC’s of less than 3lbs per gallon this water based one coat uses water for both cleanup and thinning. 
857N-018 was developed specifically for environments where anti-corrosion and anti-galling are required.   The anti-corrosive qualities improve when the coating is paired with a zinc phosphate pre-treatment; however, it also works very well when applied over a cleaned and lightly blasted substrate
857N-018 is a blue PTFE one coat that cures at a low 450F. It is very affordable and can be built up to 2.5mils if multiple coats are required. 
As with all new additions, expectations are very high for this coating. It has been very competitively priced and we urge you to contact us for a quote or to learn more about this new coating alternative. 
Contact Chris Dohl at Intech Services for pricing and additional information.
Physical Data for 857N-018:
Manufacturing BenefitsNEW DuPont Technology 857N-018Typical Fastener Coatings
VOC emissions, 1<3.0 lbs/gal2.84 - 5.2 lbs/gal
Water Clean upYesNo
Bake Schedule450°F (232°C) x 20 min.400°F (204°C) x 15 min.
Coefficient of Friction

0.18 +/- 0.04
0.14 +/- 0.00

0.17 +/-  0.03
0.14 +/-  0.01
Salt Spray Test, 2300 hrs120 hrs
Salt Spray on Phosphated Steel>1500 hrs>1500 hrs
Wear Resistance (mg/kg Kcycles)31.948.8
Pencil Hardness4H-6H4H-6H
1  VOC less exempt as calculated per US regulations
2  <15% rust per ASTM B-117. Substrate tested is carbon steel
3  Tested over bare carbon steel

To expand your knowledge and understanding of the DuPont Teflon® coating line, consider attending our next I³ Teflon® Products Training Seminar scheduled for June 2011.
Visit to learn more about DuPont Teflon® Industrial Finishes line and I³ Intech Information Institue. 
If you have not yet registered on www.intechservices.comClick Here to Create a New Account.

No comments:

Post a Comment