The Intech Insider is designed to help readers stay in touch with the latest information & developments in the industrial coating industry. Stay connected with the Intech Insider!

Thursday, January 19, 2017

3-Coat Improved Standard Teflon™ System

A premiere coating system for end-uses that require nonstick, thermal stability, and abrasion-resistant properties.

Product Overview

The 3-Coat Improved Standard is the premium Teflon™ coating line reinforced for scratch and durability. The line is for end-uses that require non-stick, thermal stability to 500°F, and high lubricity. Decades of innovation and technology have led to significant improvements in this coating.

This water-based, multi-color system is a unique blend of PTFE, PFA, and FEP fluoropolymer chemistry. The primer utilizes On-Smooth technology for easy adhesion to smooth surfaces when necessary. When your application requires ultimate release and superior durability, 3-Coat Improved Standard is your choice.

Feature & Performance Benefits

  • Primer can be applied On-Smooth on aluminum substrates
  • Thin film, "wet on wet" mid-coat/topcoat for quick application and cure
  • Water-based for low emission environmental standards 
  • PFOA free 
  • Maximum use temperature of 500°F


Excellent nonstick properties: premium coating for providing releaseHigh lubricityFDA approved for direct food contact regulations in 21CFR
Chemical and abrasion resistant

Application Process

For best application, apply to aluminum oxide grit blasted metal substrate. If grit blasting is not appropriate, the coating can be applied to a smooth, clean surface. Spray applied primer is force dried at 5-8 min. at 120-150°C (248-302°F), then mid coat/topcoat applied wet on wet and cured minimum 5 min. at 428°C (802°F) or 3 min. at 435°C (815°F) (metal temperature). Peak temperature should not exceed 440°C (824°F).

For more information on this coating, contact Intech Services, Inc.

No comments:

Post a Comment